letATwork - ISP Programmer
The letATwork - ISP Adapter is designed to program the Atmel In-System Programmable microcontrollers. You can connect directly to the target system (ISP) through the 10 pin connector.
It includes free third party Programming Software:
- PonyProg - Serial device programming software for Windows and Linux
- UISP - a commandline programming software for Linux and Windows
There is various other third party software available to use
with the ISP programmer.
Please refer to the specific Software Home Page for a list of Features.
Suitable Programming Software
Each software programming tool which supports the SPI programming mode of the Atmels can be used, e.g.
- the free PonyProg Software,
- UISP - a free commandline programming software
- the ISP function of the CodeVisionAVR C Compiler
- the ISP function of the BASCOM-AVR basic compiler
Supported Devices
The specific supported devices depend on the Programming Software you finally use. E.g. PonyProg supports the following AVRs:
|
ATtiny12 ATtiny15 |
AT89S8252 AT89S53 AT90S1200 AT90S2313 AT90S2323 AT90S2333 AT90S2343 AT90S4414 AT90S4433 AT90S4434 AT90S8515 AT90S8534 AT90S8535 |
ATmega603 ATmega103 ATmega161 ATmega163 |
Example of use:
Technical Data
letATwork - ISP Programmer
Hardware Features
- Connects to standard PC parallel port
- Supporting programming LED
- Standard 10-pin connection to target (connections)
- Power derived from target, no external supply required
- The Programmer includes a CD-ROM with Open Source and free ISP Software and AVR-Tools.
Send orders to:
or
Our Online Shop